Jeep Uconnect Download (2024)

While most customers will wait to visit their dealer to upgrade the firmware of their UConnect systems, it’s not required for those who have connected USB drives in their recent Chrysler, Jeep, Ram, or Dodge. However, it is complicated and somewhat time consuming. This is a little “how to” for updating UConnect firmware yourself.

Jeep Uconnect App Download

First, visit the UConnect upgrade site, whose URL may have changed since we posted this. Put in your VIN number (you do have that in LastPass, 1Password, or such, right? It may be on your insurance or registration cards, it’s definitely on your dealer repair and maintenance docs). Then you will see a list of what’s available, if anything. (Our car does not seem to need the security update, or there was an error in the system which prevented it from showing.)

Jeep Uconnect Firmware Update

Now, you may think that the next step would be to click on the available downloads, find them in your computer, open them to find a ReadMe file, and then follow some instructions. That is not the way Chrysler’s web gurus work. While UConnect’s job is to make life easy, the webmasters’ job seems to be to make it more complex and frustrating. Thus, they have a long tutorial — you are taking notes, right? — though you can click “skip” to get to the end, if you dare. Here are the salient points:

• We did not see this in the tutorial: Have your radio anti-theft passcode ready. Your dealer will know it.
• You will need to download Akamai software to download their updates, though their updates aren’t all that large and other companies use Akamai without making end-users install anything. On the lighter side, you can do this from a Mac.
• They want you to use a PC-formatted 4-GB USB drive with nothing else on it. Our upgrades were both under 256 MB. I don’t understand the 4 GB requirement but we had one so we used it.
• The files you download will be zip files, so download them to your hard drive, unzip them, and then copy them to the USB drive. You can only do one at a time. That is, copy one over, upgrade the car, come back, delete it, put on the next file, etc. That assumes you have more than one update, of course.
  • Our navigation system upgrade came in a subfolder. The subfolder had a single item inside it. D'oh!
• Unplug any SD cards or USB cards from your car, then put in your USB thumb drive. Make sure you have something to do and you're in the shade (summer) or someplace warm (winter) because this will take five to fifteen minutes. Headphones and an iPod, iPhone, or Android/whatever may help.
• Move the key to Run — not Start, not Accessory. Those of you with button starters, press it twice to get to Run but make sure your foot isn’t on the brake.
• You now get a screen that asks if you want to upgrade. Look at the firmware numbers carefully to make sure you are not backtracking. If you say yes, it will spend a good deal of time copying files, but when it's done, you're nearly done.
• When it asks for an anti-theft code, start the engine and wait a few minutes to see if it clears. If you get the anti-theft code (which you probably don't know) wrong three times, you have to have the car in Run for 30 minutes before you can try again.

Uconnect Jeep Update Download

Jeep Uconnect systems contain a number of navigation features. Explore sensor assisted GPS, SiriusXM Traffic & Travel Link, points of interest & more. Uconnect® is the award-winning connected vehicle platform that is built into Chrysler, Dodge, Jeep®, Ram and FIAT® Brand vehicles.It delivers available advanced connectivity, entertainment, Navigation and communication features that are as powerful as they are easy to use.

Congratulations! You've saved yourself from asking your dealer to do something for free. (Not all will do it for free — the security update, yes, but not necessarily ordinary firmware updates.) Sure, FCA US LLC made it a lot harder than it had to be, but it was probably much faster than a dealer visit, and easier too, if a bit more risky.

Here’s the imagery...

Download Uconnect Update To Usb

Jul 30, 2015 How to update your Uconnect-equipped car and the keep hackers out. After Wired revealed security researchers were able take control of a Jeep through its Uconnect. While most customers will wait to visit their dealer to upgrade the firmware of their UConnect systems, it’s not required for those who have connected USB drives in their recent Chrysler, Jeep, Ram, or Dodge. However, it is complicated and somewhat time consuming. This is a little “how to” for updating UConnect firmware yourself. Nov 09, 2019 No matter where you are, your vehicle is never far away with the Uconnect® App. Owners of vehicles equipped with Uconnect + SiriusXM Guardian. connected services, or earlier vehicles with Uconnect Access. connectivity can take advantage of the following services designed to make your life easier: Lock or unlock your car from virtually anywhere Start your car & cancel start remotely Flash the. Stay connected to your vehicle from nearly anywhere. Now you can start your engine remotely, lock or unlock your doors with the touch of a button or even locate your vehicle in a crowded parking lot. With the Uconnect® App, life on and off the road has never been so easy. Your smartphone integrates seamlessly with your available Uconnect® system to let you make and receive calls, reply to text messages using your voice, play songs from your smartphone and more, right from your Jeep® Brand vehicle. Enjoy the features of your smartphone with the convenience of your Uconnect system.

Uconnect Jeep Downloads

Also see: New technologies • Chrysler innovations • Alternative fuels and such • The rocket scientists at Chrysler Electronics

Uconnect Software Download